Education/Shaping
Motor settings and file selection
Check speed, torque, and the correct file sequence before the first instrument enters the canal.
Chairside sequence
Step by step
- 01
Identify the instrument
Confirm the system, size, taper, and intended role. Do not select a preset by a similar product name.
- 02
Verify the instructions
Check the current manufacturer instructions for speed, torque, motion, and single-use requirements.
- 03
Establish the glide path
Motor settings cannot compensate for an unconfirmed path or coronal interference.
- 04
Monitor each engagement
Use light pressure, clean the flutes, and stop if the file binds or feedback changes.
Use the current instructions supplied with the exact instrument. Settings are not interchangeable between file systems.
Sequence follows anatomy
The NZ ET example progresses from Micro-Path 13/.03 to ET 20/.04 and ET 25/.04. The PT guide describes SX, S1, and S2 followed by an appropriate finishing file. These are source sequences, not a requirement to take every instrument through every canal.
Inspection and use
Inspect files before and during treatment. Visible distortion is a reason to discard an instrument, but fatigue damage may not be visible. Follow the instrument’s labeling for use and disposal; do not treat the NZ source’s general inspection advice as permission to reuse a single-use USA file.
Reference table
| NZ source system | Speed | Torque | Role |
|---|---|---|---|
| Micro-Path | 300 rpm | 2.0–2.5 N·cm | Glide path |
| ET | 350 rpm | 3.0 N·cm | Constant-taper shaping |
| PT | 300 rpm | 3.0 N·cm | Progressive-taper shaping |
Sources & further reading
Read the source material
Adapted for the EndoTech USA education library. NZ reference documents retain their original edition and branding.
Continue reading
All guides →Shaping
ET constant-taper protocol
MicroPath glide preparation, ET opening and 17/.04 to 25/.04 shaping, with the illustrated file sequence and EndoTech motor settings.
Shaping
PT progressive-taper technique
Open the coronal path, prepare the middle third, and select the finishing size from the canal.
Disinfection
Irrigation that reaches beyond the file
Fresh chemistry, controlled delivery, and enough contact time to work in the anatomy instruments cannot reach.